
- -
*Do not connect the cable to a meter at
this stage.
6.6 How to change meter setting
Set the time and serial number of a meter before you connect it to this software for the first time.
●
Procedure ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
1. When you click [Maintenance] on <Main Menu>, <Maintenance Menu> appears. Click
[Meter set-up] on <Maintenance Menu> to display <Meter set-up>.
2. Connect the cable to communication port of your PC.
3. The message “Connect a meter to receive the settings” appears, then, connect a meter.
Once the meter is connected, the power turns on automatically.
4. Once the meter power turns on, data transmission starts automatically. After data
transmission is completed, a message suggesting you remove the cable will appear.
Remove the cable from the meter, then, click [OK].
5. Current setting status of the meter appears.
Change the setting, if necessary, then, click [Write].
Interface Cable
*Be sure to connect the meter when the display shows “Connect a meter to receive the
settings.” When other messages are displayed, information set in the meter will not be
transmitted to PC.
Komentáře k této Příručce